this post was submitted on 02 Oct 2026
26 points (96.4% liked)

Selfhosted

62664 readers
362 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Detailed Rules Post

  1. Be civil.

  2. No spam.

  3. Posts are to be related to self-hosting.

  4. Don't duplicate the full text of your blog or readme if you're providing a link.

  5. Submission headline should match the article title.

  6. No trolling.

  7. Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details. Tags [CBH] or [AIP] are required, see the links in Rule 8 for details.

  8. AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post, and find example disclosures here.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 3 years ago
MODERATORS
 

I spotted this project today and thought it might be of interest for some of you.

It will allow you to stream your vinyls, CD or cassette players to airplay capable devices.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] ahmedezat_katteb@lemmy.world 6 points 1 day ago (1 children)

Nice find. One thing to check before buying parts: the README says it works with line-level sources through a USB audio adapter. Most turntables output phono level, so unless yours has a built-in preamp (look for a PHONO/LINE switch on the back), you'll need a phono preamp between the deck and the USB adapter. Without it the signal is very quiet and has no RIAA equalisation, so it sounds thin.

Also, AirPlay buffers for a couple of seconds, which is fine for listening, but you'll notice the delay if you're standing next to the speakers while dropping the needle. The automatic start/stop on signal detection is the clever part for a turntable.

[โ€“] Harald_im_Netz@feddit.org 1 points 23 hours ago

Look for RIAA-Amplifiers. They usually offer two cinch-inputs and two cinch-outputs, to get the signal on line level. They're fairly inexpensive.