I just ask OP's mom.
this post was submitted on 02 Jun 2026
254 points (98.8% liked)
Lemmy Shitpost
40082 readers
4207 users here now
Welcome to Lemmy Shitpost. Here you can shitpost to your hearts content.
Anything and everything goes. Memes, Jokes, Vents and Banter. Though we still have to comply with lemmy.world instance rules. So behave!
Rules:
1. Be Respectful
Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.
Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.
...
2. No Illegal Content
Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.
That means:
-No promoting violence/threats against any individuals
-No CSA content or Revenge Porn
-No sharing private/personal information (Doxxing)
...
3. No Spam
Posting the same post, no matter the intent is against the rules.
-If you have posted content, please refrain from re-posting said content within this community.
-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.
-No posting Scams/Advertisements/Phishing Links/IP Grabbers
-No Bots, Bots will be banned from the community.
...
4. No Porn/Explicit
Content
-Do not post explicit content. Lemmy.World is not the instance for NSFW content.
-Do not post Gore or Shock Content.
...
5. No Enciting Harassment,
Brigading, Doxxing or Witch Hunts
-Do not Brigade other Communities
-No calls to action against other communities/users within Lemmy or outside of Lemmy.
-No Witch Hunts against users/communities.
-No content that harasses members within or outside of the community.
...
6. NSFW should be behind NSFW tags.
-Content that is NSFW should be behind NSFW tags.
-Content that might be distressing should be kept behind NSFW tags.
...
If you see content that is a breach of the rules, please flag and report the comment and a moderator will take action where they can.
Also check out:
Partnered Communities:
1.Memes
10.LinuxMemes (Linux themed memes)
Reach out to
All communities included on the sidebar are to be made in compliance with the instance rules. Striker
founded 3 years ago
MODERATORS
I would use 0,5x(A+B) because chicks dig a big branch.
Personally I start measuring from the middle of my taint 😌
That's a shoddy way of doing it. There are measurement standards.
The only way to get an accurate measurement is to cut the branch off first.
It is imperative that the cylinder and the larger object remain unharmed.
The cylindet MUST stay intact!
But you're supposed to measure it twice before that!
I just had some serious flashbacks to all the fucking Handy Manny I’ve watched. Thanks for that. 👍🏻
load more comments
(1 replies)
The branch cannot be cut.
The branch is ~4.5" in girth and attempting to cut it off could cause discomfort
🎵Detachable tree branch🎵
Method A on account that that would be the maximum usable length
As a skilled carpenter who's used to measuring wood, this is the only answer.
Well..... It kinda depends. If I were to be ordering stock to recreate the branch or even if I were making a covering for the branch. I'd have to order at least 6 inches of material to cut down.
So I think it matters most how you are intending to use it.
Oh you're a skilled carpenter? How much wood have you cut in your time
Half as much as they have measured, is my guess.
THIS ia getting philosophical.... i mean, first of all, things don't need to be cut perfectly in half every time they're cut.
But then your answer is probably an estimate/approximation.
HOWEVER... when you cut one piece of wood into two, is not 100% of the wood cut into?
So either this carpenter measures 50% of his wood aimlessly, or you, sir, are a LIAR
Measure twice, cut once
That’s not how it works with soft bodies though, method B represents potential useable length when pointing down. It’s only distorted because it’s pointing up. For rigid bodies, I’d agree.
So... Non rigid?
Diameter obviously. But also, the bottom line is going into trunk wood so obviously wrong.
They are using the wrong measuring unit, instead they should measure the force needed to pull it level.
You're saying rigidity/turgidity trump sheer length and girth?
Most arborists prefer branches that can handle the load, and avoid sagging branches or ones that snap off.
If you trim the bushes the branch looks bigger. Pro tip.
Branches and other small cylinders can be sized using M&M tubes
Banana for scale
The generally accepted method used by scientists is to firmly push your ruler against the base of tree at the top of the branch. This is called BPEL, or bark-pressed erect length.
Hehe hehe erect
I can't use method B, the tree fruit are in the way.
None of them are. You need a graduated cylinder.
482 cm3 here.
This can be easily calculated by the formula [(length x diameter) + (Weight / Girth)] / Angle of Tip^2
You measure from the back of the balls.
From the edge of the anus of course... the further edge.
Or… from the base of the skull. The only accurate measurement.
The correct way is to see how deep into a Pringle can it can go. For an accurate measure, you'll need to prevent angled entry. You can help it slide in straight by using a couple guiding sponges on either side of a latex glove attached to the rim pushed up inside it. Put a bit of Vaseline in the glove to prevent tearing the glove with the rough bark. For maximum safety, put the jar of Vaseline in a warm water bath for a few minutes beforehand to make the viscosity better for smooth entry and exit.
That sounds like an awful lot of effort just to jack off a tree branch
The correct answer is "between 114 and 152 millimeters" because both measures are relevant and necessary from an engineering standpoint: For the purposes of sizing something such that it can utilize the branch for support, it must be made clear that the branch is solid and whole up to 114 millimeters from the trunk. For the purpose of accidental collision clearance, it is necessary to know the furthest extent of the branch's reach no matter how damaged or disrupted it is. Furthermore if the branch may break and fall off, giving it at least 152mm of clearance means that it is unlikely to accidentally catch upon something in its descent even if it "hinges" away from the trunk at the base.
But then you'd need to know the angle, too.
load more comments
(1 replies)
What if there is a knot at the base of the branch?
Then you might be measuring a werewolf. Seek professional help.
(I am a professional and can help you measure the knot.)
;)
Measure from the roots
This changes everything
Bend it straight, then measure
Nevermind the measurement. How are you going to use the branch?
It's method b both for tree branches and for appendages of different creatures
view more: next ›