this post was submitted on 18 Nov 2026
620 points (99.1% liked)

Funny

16830 readers
257 users here now

General rules:

Exceptions may be made at the discretion of the mods.

founded 3 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] MeatPilot@sh.itjust.works 13 points 2 days ago (4 children)

I'd like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.

[–] oatscoop@midwest.social 12 points 1 day ago* (last edited 1 day ago)

Toggle bolts. Not the shitty "spring toggles" -- actual toggle bolts like Hilti's HTB-2, Cobra's "FlipToggle", or Toggler's "SnapToggle". They're strong and don't drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to "flip", and removing them is more of a chore.

These things:

[–] cannedtuna@lemmy.world 9 points 2 days ago* (last edited 2 days ago) (4 children)
[–] ButteryMonkey@piefed.social 4 points 1 day ago* (last edited 1 day ago)

100% will never use these again because when they do pull out partially, like from using them to anchor cat perches, they just spin, and you have to make a big hole to remove them.

Not worth it.

[–] MeatPilot@sh.itjust.works 4 points 1 day ago (1 children)

💯 Those are my go to replacements. If it's really heavy use toggle and probably try to find a stud to bare most of the weight.

But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.

You’re saying we need a bare stud to make the hole bigger.

Are you’re sure you’re not the wife? With all the hammering with studs and all.

I’m sorry I can’t help it.

[–] Sc00ter@lemmy.zip 3 points 2 days ago (1 children)

My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall...

I love em

[–] cannedtuna@lemmy.world 2 points 1 day ago (1 children)

Wh… what? You drill them in… why the hell would you hammer them in???

[–] Prove_your_argument@piefed.social 2 points 1 day ago (1 children)

Because you’re his wife silly.

[–] riquisimo@lemmy.dbzer0.com 4 points 1 day ago (1 children)

Yeah, cannedtuna! You're sc00ters wife!

[–] Sc00ter@lemmy.zip 2 points 1 day ago

Well, i never got an additional wife so essy before! This is neat

[–] TrackenDaKracken@lemmy.world 1 points 1 day ago

I use these because you can take them out and reuse them, and the screw comes out and goes back in.

Toggle bolts are stronger, but you can't take the screw all the way out without losing the back piece, that limits their utility somewhat.

[–] Imgonnatrythis@sh.itjust.works 5 points 1 day ago (1 children)

I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there's no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.

These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

[–] FUCKING_CUNO@lemmy.dbzer0.com 13 points 1 day ago (2 children)

Everything reminds me of her....

[–] happysplinter@lemmy.world 1 points 19 hours ago
[–] riquisimo@lemmy.dbzer0.com 5 points 1 day ago

lol I'm not the only one.

I'm partial to snaptoggles myself