Americans and their drywall mountings.
In Africa we attach these suckers to brick or concrete walls with 8x65mm Rawl bolts. Because you never know when someone is going to use your network rack as a ladder to get into the roof space.

General rules:
Exceptions may be made at the discretion of the mods.
Americans and their drywall mountings.
In Africa we attach these suckers to brick or concrete walls with 8x65mm Rawl bolts. Because you never know when someone is going to use your network rack as a ladder to get into the roof space.

Stick built garbage is most of what's built here. Built to be disposable like a razor and plastic forks. Would have to bracket both sides of a stud or use u bolts depending.
I have some wall mounted things that didn't have a mounting span that matched the studs. So I mounted a 2x4 to the studs and then mounted the thing to the 2x4. Shit isn't going anywhere.
But I wish it was more like the old mirror where the mounting rings were already spaced the same as the studs because it wasn't designed either to fail or by someone who either didn't know or care about how to properly mount something.
We use redheads/drop anchors here too, and I vastly prefer them, if there’s brick or cinder block to mount to.
whatever that black cord is, it's putting in some serious work holding up the rest. things would have been much worse without it
Psych Ward Storytime!
One time a lady was screaming at me in a foreign language while trying to hit me with a phone receiver on one of those shortened institutional phone cords that's only like 10 inches long. She keeps tugging at it to hit me with it and missing because it's so short. I figure I'll let her get her feelings and energy out then we can pull out the translator and talk properly.
She then catches a bout of hysterical strength and rips the entire phone assembly, receiver, body, cord, and the wall anchors
COMPLETELY.
out of the wall,
...and starts swinging the 5lb metal box at me like a flail on a phone receiver handle with a phone cord whip.
Security had her on the ground in seconds, so nobody got seriously hurt, but it was WILD to see up close and personal.
It was probably for the best. Nobody with cable management like that deserves to have a server.
This is why the voice data video people are not allowed to mount equipment racks.
Not to ruin the joke, but I don't actually see a server in this image, just the networking gear, so at the very least, files and things are probably safe
Server cannot serve without no network!
Sure it can, you can have two local processes communicate using a protocol normally used over networks, e.g. using a http API. In that case you can have a non-networked server.
Now you can easily reach the back... win win
"They hold 50 pounds each. Four times 50 is 200 pounds, this thing can't weigh more than that. It'll be fine."
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I've never once lost anything off the roof of my car, and I've never had anything come down from a wall like this.
In the south, the proper way to secure lumber to the roof of the car is with your left hand.
That's how we carry pine trees home in Canada. Windows open, arms holding it on top, or hanging out the back of your trunk.
Good times.
Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?
I'd like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.
Toggle bolts. Not the shitty "spring toggles" -- actual toggle bolts like Hilti's HTB-2, Cobra's "FlipToggle", or Toggler's "SnapToggle". They're strong and don't drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to "flip", and removing them is more of a chore.
These things:

EZ Anchors all the way

100% will never use these again because when they do pull out partially, like from using them to anchor cat perches, they just spin, and you have to make a big hole to remove them.
Not worth it.
That was my first thought, "who thought drywall would hold up a wall mounted rack?!" There's a reason they put plywood in there
I mean one anchor that can hold isn't fine neither.
The thing most people forget into account is the safety margin (not just for anchoring things to the wall).
If you need to hang 15lbs and take an anchor for 15lbs, I sure hope that your wall is pristine and you are a pro anchor installer because you have 0 wiggle room.
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn't have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
The damage left to the sheetrock doesn't line up with a ¼" toggle bolt. It most likely was installed with drywall anchors.
Oh 100%. You can still see the anchors attached to the back right side of the rack. Probably the cheapo anchors at that.
There are servers in this state all around the world and they stop working as soon as anyone tries to fix them so they're kept just like this.
Trainee: “Well anyway, I’m gonna clock out. See you on Monday.”
And they should, their free time is theirs.
wall mount setups should automatically be built with framing stud spacing in.mind
Is that universal?
apparently not, but it should be
Did you push the thumbtacks all the way in? I bet you didn't.
Phew. Good thing they attached those safety cables!
At least the firewall is still up.

Similarly, the first computer bug:
