this post was submitted on 31 Jan 2026
1399 points (97.9% liked)
Microblog Memes
10712 readers
3128 users here now
A place to share screenshots of Microblog posts, whether from Mastodon, tumblr, ~~Twitter~~ X, KBin, Threads or elsewhere.
Created as an evolution of White People Twitter and other tweet-capture subreddits.
RULES:
- Your post must be a screen capture of a microblog-type post that includes the UI of the site it came from, preferably also including the avatar and username of the original poster. Including relevant comments made to the original post is encouraged.
- Your post, included comments, or your title/comment should include some kind of commentary or remark on the subject of the screen capture. Your title must include at least one word relevant to your post.
- You are encouraged to provide a link back to the source of your screen capture in the body of your post.
- Current politics and news are allowed, but discouraged. There MUST be some kind of human commentary/reaction included (either by the original poster or you). Just news articles or headlines will be deleted.
- Doctored posts/images and AI are allowed, but discouraged. You MUST indicate this in your post (even if you didn't originally know). If an image is found to be fabricated or edited in any way and it is not properly labeled, it will be deleted.
- Absolutely no NSFL content.
- Be nice. Don't take anything personally. Take political debates to the appropriate communities. Take personal disagreements & arguments to private messages.
- No advertising, brand promotion, or guerrilla marketing.
RELATED COMMUNITIES:
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I've done similar to a part on my dryer's control board, and a GPU's vram. In both cases, there was no diagnostic needed because the part showed some kind of physical damage. You would be surprised how often things can be fixed for 1% the cost of replacing.
You got it correct there. If it's junk, open it up, and take a look. It might be obvious. Given the rising cost of stuff like GPUs, this could become more relevant.
I had a mouse chew through the ignition wire on the ignitor on my propane furnace, which blew the board out. It cost me like 400 to do it myself after a repair guy just charged 100 to diagnose it then help3ed me over text swapping everything out. Could have been 2000 for an official repair company and way more for a new one.
Oh that's a good one. I had a coal stove that had an idle timer (mechanical clock) to keep the fire going when the thermostat wasn't calling for heat. It stopped working and the factory said they don't make them anymore, but I could special order a thirty party replacement for $250. I replaced it with an Arduino, a relay shield and a 20 line program for < $10. If I was more electrically inclined, I could have powered it from the stove's power. Instead, there is a USB cord sticking out the back =]
You sound a lot more electrically inclined than I, if I had help it would be easy enough.
I could stand to have a look at my washer/drier. The washer works perfectly well, but the drier does nothing at all. It runs, but doesn't dry. It came with the house and they're usually expensive to run, so I've never really worried about it. But I live in England, where rain is our default mode, so it's a pain to have washing up on racks in the house all the time.
Does it get hot at all? The heating element is just a coil of metal that can break. They can break easily if you put clothes in it that are too wet (like dripping). Once it breaks, it severs the current, so no heat. There should also be a fuse right next to it. These are all simple continuity checks if you have a meter.
Driers are simple machines. I suspect a dead heating element. It's probably visually broken.