this post was submitted on 18 Nov 2026
620 points (99.1% liked)

Funny

16830 readers
257 users here now

General rules:

Exceptions may be made at the discretion of the mods.

founded 3 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] TrackenDaKracken@lemmy.world 83 points 2 days ago (8 children)

"They hold 50 pounds each. Four times 50 is 200 pounds, this thing can't weigh more than that. It'll be fine."

Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I've never once lost anything off the roof of my car, and I've never had anything come down from a wall like this.

[–] Burn_The_Right@lemmy.today 11 points 1 day ago (1 children)

In the south, the proper way to secure lumber to the roof of the car is with your left hand.

[–] Kojichan@lemmy.world 3 points 7 hours ago

That's how we carry pine trees home in Canada. Windows open, arms holding it on top, or hanging out the back of your trunk.

Good times.

[–] cannedtuna@lemmy.world 36 points 2 days ago (3 children)

Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?

[–] diaphragmwp@discuss.tchncs.de 23 points 2 days ago (2 children)

Almost forgot walls are made out of nothing in North America

[–] TrackenDaKracken@lemmy.world 4 points 1 day ago (4 children)

Yeah, yeah. "Americans are, stupid they build houses out of wood and paper."

Y'all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn't need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don't see beautiful "art" like this in bathrooms and kitchens in the U.S.:

[–] kestrel7_7@lemmy.world 12 points 1 day ago* (last edited 1 day ago)

As an American carpenter, we are (collectively) stupid and our houses really are (on average) much lower quality than Europeans. I try to explain this to my coworkers and they say stuff like “whoa! Somebody’s got high standards!”

I went to Europe last year and everyone’s houses had immaculate cabinetry. Every place had perfect water pressure, their plumbing is on average way better than ours too. Who cares if the pipes and conduits are visible? That just means they’re more accessible to repair.

This is all my professional opinion as someone who actually builds houses. The Europeans are winning so hard, most Americans aren’t even aware of how badly we’re losing.

[–] Diplomjodler3@lemmy.world 5 points 1 day ago* (last edited 1 day ago) (1 children)

As a European I'm always flabbergasted whenever a bunch of cardboard houses are shredded to bits by hurricanes in the US. If only there was a way to avoid that.

[–] Croquette@sh.itjust.works 7 points 1 day ago

Don't build in a hurricane field?

Didn't intend to imply it's inherently bad. Although my usual understanding of "wooden house" is a house with literal wooden logs as walls.

[–] nanometer1625@thelemmy.club 2 points 1 day ago* (last edited 1 day ago)

Haha. You know, this is more true than false, because they are mostly void space.

[–] MeatPilot@sh.itjust.works 13 points 2 days ago (4 children)

I'd like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.

[–] oatscoop@midwest.social 12 points 2 days ago* (last edited 1 day ago)

Toggle bolts. Not the shitty "spring toggles" -- actual toggle bolts like Hilti's HTB-2, Cobra's "FlipToggle", or Toggler's "SnapToggle". They're strong and don't drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to "flip", and removing them is more of a chore.

These things:

[–] cannedtuna@lemmy.world 9 points 2 days ago* (last edited 2 days ago) (4 children)
[–] ButteryMonkey@piefed.social 4 points 1 day ago* (last edited 1 day ago)

100% will never use these again because when they do pull out partially, like from using them to anchor cat perches, they just spin, and you have to make a big hole to remove them.

Not worth it.

[–] MeatPilot@sh.itjust.works 4 points 1 day ago (1 children)

💯 Those are my go to replacements. If it's really heavy use toggle and probably try to find a stud to bare most of the weight.

But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.

You’re saying we need a bare stud to make the hole bigger.

Are you’re sure you’re not the wife? With all the hammering with studs and all.

I’m sorry I can’t help it.

[–] Sc00ter@lemmy.zip 3 points 2 days ago (1 children)

My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall...

I love em

[–] cannedtuna@lemmy.world 2 points 1 day ago (1 children)

Wh… what? You drill them in… why the hell would you hammer them in???

[–] Prove_your_argument@piefed.social 2 points 1 day ago (1 children)

Because you’re his wife silly.

[–] riquisimo@lemmy.dbzer0.com 4 points 1 day ago (1 children)

Yeah, cannedtuna! You're sc00ters wife!

[–] Sc00ter@lemmy.zip 2 points 1 day ago

Well, i never got an additional wife so essy before! This is neat

[–] TrackenDaKracken@lemmy.world 1 points 1 day ago

I use these because you can take them out and reuse them, and the screw comes out and goes back in.

Toggle bolts are stronger, but you can't take the screw all the way out without losing the back piece, that limits their utility somewhat.

[–] Imgonnatrythis@sh.itjust.works 5 points 1 day ago (1 children)

I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there's no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.

These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

[–] FUCKING_CUNO@lemmy.dbzer0.com 13 points 1 day ago (2 children)

Everything reminds me of her....

[–] happysplinter@lemmy.world 1 points 19 hours ago
[–] riquisimo@lemmy.dbzer0.com 5 points 1 day ago

lol I'm not the only one.

I'm partial to snaptoggles myself

[–] thisbenzingring@lemmy.today 11 points 2 days ago (1 children)

That was my first thought, "who thought drywall would hold up a wall mounted rack?!" There's a reason they put plywood in there

[–] cantstopthesignal@sh.itjust.works 9 points 2 days ago (1 children)

So it's plywood screwed to stud and rack screwed to plywood?

[–] thisbenzingring@lemmy.today 7 points 2 days ago

That is what I usually see. But for network equipment. Not servers. Those should always be in floor racks

[–] Croquette@sh.itjust.works 4 points 1 day ago

I mean one anchor that can hold isn't fine neither.

The thing most people forget into account is the safety margin (not just for anchoring things to the wall).

If you need to hang 15lbs and take an anchor for 15lbs, I sure hope that your wall is pristine and you are a pro anchor installer because you have 0 wiggle room.

[–] DrPop@lemmy.world 6 points 1 day ago (1 children)

Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn't have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.

[–] nanometer1625@thelemmy.club 4 points 1 day ago

Good thing you didn't have bed budge.

[–] Onomatopoeia@lemmy.cafe 5 points 2 days ago* (last edited 2 days ago) (1 children)

If one will hold it, then 4 is good insurance.

That's always been my approach to tying/strapping things down, whether on a roof or trailer.

I've lost about 25% of all the tie down straps I've ever owned. They're on the road, somewhere. But never a load.

Flex in materials is a bitch.

Now wall anchors are only for light stuff. You want some weight, then I'm doing lags into studs, even if that means I need to mount some wood across studs first.

[–] shalafi@lemmy.world 2 points 2 days ago

Lags into studs is how I mount my safes. Nothing else will do.

[–] JohnnyCanuck@lemmy.ca 4 points 2 days ago (1 children)

My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all... Quick tug on a strap, wiggle the object a little, "yup, looks good!"

[–] alt_xa_23@midwest.social 9 points 2 days ago (1 children)

As long as you say "that's not going anywhere", it'll definitely hold

[–] im_fine_sandy@nord.pub 4 points 2 days ago

You have to twang all the ropes while incanting.

[–] snooggums@piefed.world 4 points 2 days ago (1 children)

I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I'd rather it dodn't shift around and definitely don't want the wind to suck it up and possibly out on the highway.

Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed...

[–] degen@midwest.social 1 points 1 day ago

Same but it was a golf cart with a lift kit and not the stock speed controller